Agrotechnophos Fertilizer products

Call Us Now +380 53 265 4995

Our Ferilizers Products

1. Coarse-grained urea

Quality requirements, white coarse-grained
The mass fraction of nitrogen, 46.2%
Biuret, not more than 1,0%
Moisture not more than 0,5%
Size of granules, 1 mm - 4 mm 90% minimum
Free ammonia, 160 PXT PPM maximum (ppm - ppm).
Melting point, 32 degrees Celsius.
Physical properties, non-radioactive white, loose, free from harmful substances with a coating, spherical and uniform in size, 100% pretreated

2. Purely reddened urea

Quality requirements, white granules
Nitrogen, calculated on a dry weight basis, 46.2%
Biuret, not more than 1,0%
Water, not more than, 0,5%
Pellet Size, 2 mm - 4 mm 90% minimum
Free ammonia, 160 PXT PPM maximum
Melting point, 132 degrees Celsius
Physical properties, non-radioactive white, loose, free from harmful substances with a coating, spherical and uniform in size, 100% pretreated

3. Ammonium chloride

Moisture, by weight, maximum 2.0%
Ammonia nitrogen, by weight, at least 25.0%
Chloride, other than ammonium chloride (as NaCl) by weight, (as calculated on dry basis), a maximum of 2.0%

4. Ammonium nitrate

Total nitrogen content, in the equivalent of nitrogen (N), minimum 34.4%
Water content, maximum 0.3%
PH 10 salt extract, maximum 5.5%
Size of the granules, by weight:
1-4 mm minimum 95% 80%
Including 2-4 mm, minimum
Less than 1 mm, maximum 2%
Static strength of granules, N / GRNL. (KH / GRNL.), Minimum 8 (0.8)
Expanse of at least 100%
The content of magnesium nitrate, in the equivalent of magnesium oxide (MgO), 0.2-0.4%

5. Ammonium phosphate sulfate (16-20-0)

Moisture by weight, maximum 1.0%
Total ammoniacal nitrogen by weight, minimum 16.0%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, at least 20.0%
Water-soluble phosphates (as P2O5) by weight, at least 19.5%
Particle size: at least 90% of the material must pass through a 4 mm sieve according to the international standard and should be kept on a sieve 1 mm. No more than 5% should be under the sieve of 1 mm according to the international standard.
Sulfur (as S) by weight, at least 13.0%

6. Ammonium phosphate sulfate (18-9-0)

Moisture by weight, maximum 1.0%
Ammonia nitrogen by weight, at least 18.0%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, minimum 9.0%
Water-soluble phosphates (as P2O5) by weight, at least 8.5%
Particle size: not less than 90% of the material must pass through a 4 mm sieve according to the international standard and should be kept on a 1mm sieve. No more than 5% should be under the sieve of 1 mm according to the international standard.

7. Ammonium phosphate sulphate (20-20-0)

Moisture by weight, maximum 1.0%
Total nitrogen by weight, minimum 20,0%
Ammonia nitrogen by weight, at least 18.0%
Nitrogen in the form of urea by weight, maximum 2.0%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, at least 20.0%
Water-soluble phosphates (as P2O5) by weight, at least 17.0%
Particle size: not less than 90% of the material must pass through a 4 mm sieve according to the international standard and should be kept on a 1mm sieve. No more than 5% should be under the sieve of 1 mm according to the international standard.
Sulfur (like S), by weight, at least 13.0%

8. Ammonium sulfate

Moisture by weight, maximum 1.0%
Ammonia nitrogen by weight, at least 20.6%
Free acidity (as H2SO4) 0.025
Arsenic (as As2O3) 0.01
Sulfur (as S) by weight, at least 23.0%

9. Quicklime-ammonium nitrate

Moisture with a weight of 1.0%
Total nitrogen, ammonium and nitrate, at least 26.0%
Calcium nitrate percentage by weight, maximum 0.5%
Particle size: at least 90% must pass through a 4 mm sieve according to the international standard. No more than 5% should be under a sieve of 1 mm.

10. Calcium nitrate

Total nitrogen by weight, minimum 15,5%
Ammonia nitrogen by weight, maximum 1.1%
Nitric nitrogen, as N by weight, at least 14.4%
Water-soluble calcium by weight, minimum 18.8%
Water-insoluble C by weight, maximum 1.5%

11. (DAP) Hyammonium Phosphate (18-46-0)

Moisture,% by weight, maximum 1.5
Total nitrogen in percentage by weight, minimum 18,0
Form of ammoniacal nitrogen in percent by weight, minimum 15.5
Total nitrogen in the form of urea in percent by weight, maximum 2.5
Phosphates soluble in neutral ammonium citrate (as P2O5) in percent by weight, minimum 46.0
Water-soluble phosphates (as P2O6) as a percentage by weight, minimum 41.0

12. Monoammonium phosphate

Content of digestible phosphates, in the equivalent of P2O5 52 ± 1%
Water-soluble phosphates, equivalent to P2O5, at least 21.8%
Total nitrogen content 12,0 ± 1%
Water content, maximum 1.5%
Size of the granule, by weight:
1-4 mm, minimum 09%
Less than 1 mm, maximum 20%
Less than 6 mm 100%
Static granule strength (PMA), minimum 3
Expanse of at least 100%

13. Nitrophosphate (20-20-0)

Moisture by weight, maximum 1.5%
Total nitrogen by weight, minimum 20,0%
Nitrogen in the ammonium form by weight, at least 10.0%
Nitrogen in nitrate form by weight, maximum 10,0%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, at least 20.0%
Water-soluble phosphates (as P2O5) by weight, at least 12.0%
Calcium nitrate, by weight, maximum 1.0%
Particle size: not less than 90% of the material must pass through a 4 mm sieve according to the international standard and should be kept on a 1mm sieve. No more than 5% should be under the sieve of 1 mm according to the international standard.

14. N.P.K. (Nitrogen, phosphorus, potassium) (14-28-14)

Moisture by weight, maximum 1.5%
Total nitrogen by weight, minimum 14,0%
Ammonia nitrogen by weight, at least 8.0%
Urea nitrogen by weight, maximum 6.0%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, at least 28.0%
Water-soluble phosphates (as P2O5) by weight, at least 23.8%
Water-soluble potash (as K2O) by weight, at least 14.0%
Particle size - no less than 90% of the material should pass through a 4 mm sieve according to the international standard and should be retained on a 1mm sieve. No more than 5% should be under the sieve of 1 mm according to the international standard.

15. NPK 15-15-15

Moisture by weight, maximum 1.5 (1.0-1.5%)
Total nitrogen, minimum 15,0
Ammonium N by weight, minimum 12,0%
Nitrogen in the form of urea, by weight, maximum 3.0%
Nitrogen nitrogen by weight, maximum 7.5%
Phosphates soluble in neutral citrate (as P2O5), by weight, at least 15.0%
Water-soluble phosphates (as P2O5) by weight, at least 12.0%
Water-soluble potash (as K2O) by weight, at least 15.0%
Particle size: not less than 90% must pass through a 4 mm sieve and hold on a sieve at 1 mm according to the international standard.
Calcium nitrate by weight, maximum 1.0%

16. NPK 17-17-17

Moisture by weight, minimum 1.5 (1.0-1.5%)
Total nitrogen by weight, minimum 17,0%
Ammonia nitrogen by weight, minimum 5,0%
Urea nitrogen by weight, maximum 12.0%
Phosphates soluble in neutral citrate (as P2O5) by weight, at least 17.0%
Water-soluble phosphates (as P2O5) by weight, at least 14.5%
Water-soluble potash (as K2O) by weight, minimum 17.0%
Particle size: not less than 90% must pass through a 4 mm sieve and hold on a sieve 1 mm according to the international standard..

17. N.P.K. (19-19-19)

Moisture by weight, maximum 1.5%
Total nitrogen by weight, minimum 19,0%
Ammonia nitrogen by weight, minimum 5.6%
Urea nitrogen by weight, maximum 13.4%
Phosphates soluble in neutral citrate ammonium (as P2O5) by weight, minimum 19.0%
Water-soluble phosphates (as P2O5) by weight, at least 16.2%
Water-soluble potash (as K2O) by weight, at least 19.0%
Particle size: not less than 90% of the material must pass through a 4 mm sieve according to the international standard and should be kept on a 1mm sieve. No more than 5% should be under the sieve of 1 mm according to the international standard.

18. NPK 20-20-20 (+ TE) (TE: micronutrients)

Appearance: white crystal
Total N, minimum 20.0%
P2O5, minimum 20.0%
K2O, minimum 20.0%
Cl, maximum 0.1%
Substances insoluble in water, maximum 0.5%

19. NPK 22-22-11

Moisture by weight, maximum 1.5%
Total nitrogen by weight, minimum 22,0%
Ammonia nitrogen by weight, minimum 7.0%
Urea nitrogen by weight, maximum 15.0%
Phosphates soluble in a neutral citrate (like P2O5) weight, at least 22.0%
Water soluble phosphates (as P2O5) weight at least 18.7%
Water-soluble potash (as K2O) by weight, at least 11.0%
Particle size: not less than 90% must pass through a 4 mm sieve and hold on a sieve 1 mm according to the international standard.

20. NPKS 21: 10: 10: 2

Total nitrogen content, in the equivalent of N, at least 21 ± 1%
The content of digestible phosphates, in the equivalent of P2O5, at least 10 ± 1%
The content of water-soluble phosphates, in the equivalent of P2O5, at least 6%
Potassium content, in the equivalent of K2O, min 10 ± 1%
Sulfate content, in equivalent S, minimum 2%
Water content, maximum 1%
Pellet Size: 1-4 mm, minimum 90%
Less than 1 mm, minimum 3%
Less than 6 mm, minimum 100%
Static strength of granules (kg / GRNL.), Minimum 3
Expanse of at least 100%

21. NPKS 22: 7: 12: 2

The total nitrogen content, in the equivalent of N, is at least 22 ± 1%
The content of digestible phosphates, in the equivalent of P2O5, at least 7 ± 1%
Content of water-soluble phosphates, equivalent to P2O5, minimum 4%
Potassium content, in the equivalent of K2O, min 12 ± 1%
Sulfate content, in equivalent S, minimum 2%
Water content, maximum 1%
Pellet Size:
1-4 mm, minimum 90%
Less than 1 mm, maximum 3%
Less than 6 mm, minimum 100%
Static strength of granules (kg / GRNL.), Minimum 3
Expanse of at least 100%

22. NPKS 27: 6: 6: 2

Total nitrogen content, in the equivalent of N, at least 27 ± 1%
The content of digestible phosphates, in the equivalent of P2O5, at least 6%
Potassium content, in the equivalent of K2O, at least 6%
Sulfate content, in equivalent S, minimum 2%
Microelements content, mg / kg, maximum
Zn 55
Cu 33
Water content, maximum 1%
Pellet Size:
1-4 mm, minimum 90%
Less than 1 mm, maximum 3%
Less than 6 mm, maximum 100%
Static strength of granules (kg / GRNL.), Minimum 3
Expanse of at least 100%

23. Sulfur

Sulfur is converted to dry matter, at least 99.8%
Ash, maximum 0.05%
Carbon, maximum 0.05%
Moisture, maximum 0.5%
Chloride as NaCl, maximum 0.005%
Acidity as H2SO4, maximum 0.01%
Arsenic 'traces
Selenium 'traces
Tellurium - traces
Appearance of sulfur is bright yellow in the form of raw materials

24. Triple superphosphate

Moisture by weight, maximum 12,0 (3,5 - 2%)
Free phosphoric acid (as P2O5) by weight, maximum 3.0%
Total phosphate (as P2O5) by weight, at least 46.0%
Water-soluble phosphate (as P2O5) by weight, at least 42.5%

Agrotechnophos FERTILIZERS

  • 100% Quality Fertilizer products

  • ...the BEST for INDUSTRY

  • Agrotechnophos Fertilizers